Our published minimum order for a tissue mother roll is one 40HQ container, and the published lowest minimum is 35 to 50 metric tons per grammage and size. A mixed container plan is how a first order reaches that number: several tissue grades, one container, one shipment, one document pack.
TL;DR
- Low MOQ means one 40HQ container, not part of one. Our published minimum order is 1 × 40HQ, and the published lowest minimum is 35 to 50 metric tons per grammage and size.
- The minimum is written per configuration, so mixing is the lever. Face grade at 11.5 to 16 g/m², toilet grade at 14.5 to 18 g/m² and kitchen grade at 17 to 23.5 g/m² share one width band.
- Geometry decides what shares a container. Cores of 3, 6, 10 and 20 inch plus a 76 mm pattern core, and a parent roll diameter of 1,150 ± 50 mm, decide what stacks together.
- Every roll travels wrapped and labelled. Each roll is film shrink wrapped against moisture and mould, with one large label showing width, diameter, core size and weights.
- Published lead time is 20 to 30 days after order. The port is Ningbo, payment terms are telegraphic transfer, Western Union and PayPal, and samples are free.
A low-MOQ tissue mother roll export is one 40HQ container carrying several published configurations, because the minimum is quoted per grammage and size rather than per container. A converter with four tissue grades and no volume in any one of them fills one container by mixing them.
What “low MOQ” actually means on a tissue mother roll export
A mother roll is a big paper reel, usually bigger than a human, and it is the jumbo base that a converter slits into toilet tissue, jumbo rolls, facial tissue, napkins, hand towels, kitchen towels and handkerchief paper. Our whole tissue range is published under one category page, the mother roll and parent roll range, because one winding line produces all of these widths.
Two different minimums apply, and mixing is the only lever that satisfies both of them at once. The container minimum is one 40HQ, and the configuration minimum is 35 to 50 metric tons for a given grammage and size. Because the second figure is written per grammage and size, so a buyer reaches it inside one container only by giving every grade in the mix enough tonnage, and five thin grades in one container are five undersized orders in one box. We publish both because one without the other is misleading.
Ask for the loading plan in writing, because no published table tells you how many rolls of which grade fit a 40HQ. The published figures give widths, grammages, cores, diameters and packing method, but no fixed loading plan per mixed container. I quote that plan against your configuration list, so treat a mixed container as a written loading instruction, not a rule of thumb.
Which tissue mother roll configurations can share one container
The grades that can share a container are the ones whose published geometry overlaps, and the published width band of 2,700 to 5,540 mm covers most of the tissue range. Table 1 lists each published grade. Because they share one width band, so we can wind them and pack them into the same container without a machine change between them.
Fibre choice is the one thing you should not mix casually, because the tissue raw material rule is stricter than the board rule. Our published guidance states that tissue raw material should be wood, grass, bamboo and other raw fibre materials, that recycled paper, printed paper and other recycled fibrous materials should not be used, and that deinking agent should not be used.
| Published configuration | Material | Paper weight and density | Roll width | Layer | Intended product |
|---|---|---|---|---|---|
| Facial tissue mother roll | 100% virgin wood pulp | 11.5 to 16 g/m² | 2,700 to 5,540 mm | 2, 3 or 4 ply | Facial tissue |
| Toilet tissue mother roll jumbo roll | 100% virgin wood pulp | 14.5 to 18 g/m² | 2,700 to 5,540 mm | 2, 3 or 4 ply | Toilet tissue and jumbo rolls |
| Pattern tissue parent roll | 100% virgin wood pulp | 13.8 and 14.1 g/m² | 5,500 mm | 1, 2 or 3 ply | Printed pocket tissues |
| Kitchen towel mother roll | 100% virgin wood pulp | 17 to 23.5 g/m² | 2,700 to 5,540 mm | Customised | Kitchen towels and food wrapping |
| Hand towel mother roll | 100% virgin wood pulp | 36 to 43 g/m² | 2,700 to 5,540 mm | Customised | Restroom, hotel and cafe towels |
| Napkin parent roll | 100% virgin wood pulp | 12 to 23.5 g/m² | 2,700 to 5,540 mm | 1, 2 or 3 ply | Folded and pocket napkins |
| Bamboo napkin tissue paper jumbo roll | 100% virgin bamboo pulp | 16 g/m² | 5,500 mm | Single-ply base for 2 to 4 ply | Premium and organic napkins |
Grade overlap is a packing decision, not a compliance shortcut. A mixed container still carries one document pack per configuration and one label per roll, so the mix changes the paperwork load and nothing about the rules.
How a mixed container is packed, protected and labelled
Every tissue mother roll we publish is film shrink wrapped, and in a mixed container that wrap does the work a single-grade load gets from speed. The published packing across the facial, toilet tissue, pattern, kitchen towel and hand towel mother rolls is the same: a full film shrink wrap against moisture and mould in transit. Because a mixed container is assembled from more parts, so it spends longer in transit than a single-grade load, and the wrap and the dwell time are the two things worth arguing about before booking.

The roll label is what makes a mixed container auditable, because it is the only document that travels with every reel. The parent roll we publish carries one large label showing width, diameter, core size, length, net weight and gross weight. In a mixed load that label becomes the map: at goods-in it tells you which configuration sits where. Because every roll needs its own reconciliation, so a mixed container with mismatched labels is slower to clear than a single-grade container.
Dwell time is the quiet risk in a mixed container, and it is managed by the warehouse and the loading sequence rather than by the paper itself. We produce a production sample before loading in Ningbo so you can check the actual reel that goes into the container. In my view dwell time is the factor buyers forget, because it only shows up as a claim after the container is open. Because the mixed container is assembled from several production runs, so the assembly window is the sum of the runs and the gaps between them, which is why the plan fixes which grade is loaded first.
What a mixed container changes in your paperwork
A mixed container replaces one spec sheet with several, and each configuration keeps its own compliance file because it enters the market as a different product. For a US programme, 21 CFR 176.170 covers components of paper and paperboard in contact with aqueous and fatty foods, and dry food contact of the type identified in paragraph (c) falls under 21 CFR 176.180. A kitchen towel base paper and a facial tissue base paper are converted for different end uses, so each of ours carries its own declaration.
The chemical and recycled-content thresholds for a finished tissue product sit in the ecolabel documents, not in the paper specification we quote. The Green Seal GS-1 sanitary paper products standard requires a minimum 30 percent post-consumer recycled content for recycled products, the fibre source must be 100 percent recycled content, agricultural residue, bamboo or a mix of these, colourants must not contain a sum concentration above 100 ppm of lead, mercury, cadmium and hexavalent chromium, and optical brighteners are prohibited. The Nordic Swan Ecolabel tissue paper criteria require at least 70 percent of the fibres to come from certified forests or be recycled.
The certification set is the part you can check before the container is booked, and ours is published rather than negotiated. Our published list covers ISO 9001, ISO 14001, ISO 22000, ISO 45001, FDA, FSC, Halal, CPSIA, EC, CA65, RoHS, SVHC, APEO and TPCH. Because a mixed container ships several configurations to one destination, so one file per configuration is faster than one combined file for broker and converter. The supplier facts behind that set are published too: established in 2002 in the Jiangbei industrial zone of Ningbo, near Ningbo Beilun port, with more than 10 cutting machines and a warehouse of about 30,000 square metres.
One honest limitation worth stating outright. The published figures give the minimums, the geometries, the packing method, the lead time and the terms, and they do not publish a mixed container loading plan, a per-configuration tonnage split or a freight rate for a mixed load, so those three are quoted per order. I cannot promise how a mixed load behaves on your line without a trial run, so I would rather send a free sample than a promise.
How to plan your first low-MOQ container in seven steps
Seven steps from a grade list to a loaded container
- Write the finished product for every grade, not the reel. Each grade exists because it is converted into something specific, and the finished product sets the fibre and grammage.
- Give every grade enough tonnage to clear the 35 to 50 metric ton minimum. Because the minimum is per grammage and size, a mix only works when each line inside it clears the bar on its own.
- Check the geometry compatibility. Width band, core size and diameter decide whether the rolls stack and unwind together, because a 76 mm pattern core and a 20 inch core are not neighbours.
- Take the free sample of every grade in the mix. Our published offer is a free A4 sample before the order, and free courier on the hand towel mother roll sample.
- Assemble one document pack per configuration for the destination market. Food contact declaration, certification set and labelling artwork for the market where the tissue is sold, not where it was wound.
- Get the loading plan in writing. Which grade in which position, how many rolls per grade, and how the labels are numbered, so the load is verifiable at goods-in.
- Reconcile every roll label against the packing list. The label carries width, diameter, core size, length and both weights, so it is the only proof of what was loaded.
Send your configuration mix and get the container plan
Send us the grades, and we will send back the loading plan
Finished product, grammage, width, core, quantity per grade, destination market and packing preference. You get a mixed container plan with published figures, a free sample per grade, a per-configuration document list and the commercial terms in writing.
Frequently Asked Questions
What is the minimum order for a tissue mother roll export from China?
Our published minimum order is one 40HQ container, and the published lowest minimum is 35 to 50 metric tons per grammage and size. Every grade in a mixed container still has to clear that configuration minimum on its own.
Can one container hold two different tissue mother roll specifications?
Yes, when the published geometry overlaps: the width band of 2,700 to 5,540 mm covers the facial tissue mother roll at 11.5 to 16 g/m², the toilet tissue jumbo roll at 14.5 to 18 g/m² and the kitchen towel roll at 17 to 23.5 g/m².
Which tissue mother roll grades and widths are published for mixing?
Published for mixing: facial tissue at 11.5 to 16 g/m², toilet tissue at 14.5 to 18 g/m², pattern parent roll at 13.8 and 14.1 g/m², kitchen towel at 17 to 23.5 g/m², hand towel at 36 to 43 g/m², napkin at 12 to 23.5 g/m² and bamboo napkin at 16 g/m².
How long does a low-MOQ tissue mother roll order take to produce and ship?
The hand towel mother roll publishes a production time of 20 to 30 days, the facial tissue mother roll publishes delivery of 20 to 30 days after order, and the toilet tissue mother roll publishes a lead time of 30 days. A mixed container adds the assembly window.
What packing, payment terms and port apply to a mixed container?
Every tissue mother roll in our range is published as film shrink wrapped, which protects the parent tissue roll from moisture and mould in transit. The port is Ningbo, payment terms are telegraphic transfer, Western Union and PayPal, and each roll carries one large label.
Which documents do I need for a tissue mother roll export?
For the US, request the food contact declaration against 21 CFR 176.170 and 176.180, the certification set and the test reports behind any claim on the packing. Our published certifications cover ISO 9001, ISO 14001, FDA, FSC, Halal, CPSIA, EC, CA65, RoHS and TPCH. Green Seal GS-1 and the Nordic Swan fibre rule decide what you can list.
Can I get samples and a trial run before ordering a mixed container?
Yes, and we would rather you did. Free A4 samples are published for the facial tissue, toilet tissue, pattern and kitchen towel mother rolls, the hand towel sample comes with free courier cost, and we produce a production sample before loading.
Liam
Export Sales Manager, Ningbo Bincheng Packaging Materials Co., Ltd.
Liam is Export Sales Manager at Ningbo Bincheng Packaging Materials Co., Ltd., a paper manufacturer and parent roll supplier with more than 20 years of experience in the paper industry. He specialises in parent rolls and jumbo rolls for the household tissue, industrial paper board and cultural paper markets, and the range covers tissue parent rolls, ivory board, art board, duplex board, food-grade paper board, kraft paper and copy paper.
Published 17 November 2026 · Last verified 17 November 2026 · Minimum order, the lowest minimum per grammage and size, grammage, width, ply, core size, packing, lead time, port, payment terms and certification list are from the published Bincheng pages. Food contact requirements are from 21 CFR 176.170 and 176.180; recycled content and chemical thresholds are from Green Seal GS-1 and the Nordic Swan criteria. No price, cost, profit or margin figure is quoted here, because pricing is quoted per configuration.
Post time: Nov-17-2026